•	Available Sizes	:	DN 15 to DN 100
•	Connections	:	DIN, others on request. Tube weld, clamp ferrules and threads
•	Body Material	:	316L stainless steel bar stock,no castings or forgings are used
•	Elastomers Material	:	FDA / USP Class VI (on request)
•	Contril Signal	:	0,4 – 1,2 bar, 0,4 – 2 bar
•	Internal Surface Finish	:	= 0,51 micron Ra – SF1.
•	External Surface Finish	:	= 0,76 micron Ra – SF3
•	Temprerature / PN	:	/ PN 16

The PV928 are two or three way control valves with angle connections, specially designed for food, chemical, pharmaceutical and cosmetic industries among others. The PA pneumatic actuator features a rubber diaphragm and multi-springs. Its action can be DA - direct action (air to close) or RA-reverse action (air to open). The PV928 valves have been designed to ensure an accurate control in any process condition and they have self draining design.

• Quick disassembling through clamp body bonnet coupling
• Completely made from solid bar stock material.
• Valve bonnet permanently attached to the body, removal is unnecessary for replacing the actuator.
• Metal to metal or soft sealing
• Self draining design
• Low noise and anti-cavitation plugs (Optional)
• Full port as standard Reduced or micro flow on request

•	Available Sizes	:	1/2” to 4”
•	Connections	:	ASME BPE TC, ETO, TC / ETO
•	Body Material	:	316L stainless steel bar stock,no castings or forgings are used.
•	Elastomers Material	:	FDA / USP Class VI (on request)
•	Contril Signal	:	0,4 – 1,2 bar, 0,4 – 2 bar
•	Internal Surface Finish	:	= 0,51 micron Ra – SF1.
•	External Surface Finish	:	= 0,76 micron Ra – SF3
•	Temprerature / PN	:	..-20 70/ PN 16

The PV926H hygienic control valves are single seated, twoway body constructed with angle connections. The PA pneumatic actuator features a rubber diaphragm and multisprings. Its action can be DA - direct action (air to close) or RA - reverse action (air to open). The PV926H valves have been designed to ensure an accurate control in any process condition. Their self draining design is ideally suited for clean steam service applications.

•	Available Sizes	:	1/2” to 2”
•	Connections	:	ASME BPE. Clamp ferrules or tube weld ends. Others on request.
•	Body Material	:	316L stainless steel bar stock,no castings or forgings are used.
•	Elastomers Material	:	FDA / USP Class VI (on request)
•	Contril Signal	:	0,4 – 1,2 bar, 0,4 – 2 bar
•	Internal Surface Finish	:	= 0,51 micron Ra – SF1
•	External Surface Finish	:	= 0,76 micron Ra – SF3
•	Temprerature / PN	:	..-20 70/ PN 16

The PV926A aseptic control valves are single seated, twoway body constructed with angle connections. The PA pneumatic actuator features a rubber diaphragm and multisprings. Its action can be DA - direct action (air to close) or RA – reverse action (air to open). The PV926A valves have been designed to ensure an accurate control in any process condition. The self draining design is ideally suited for clean steam service applications.